Previous
Next
Geo Knight DKA-TWIN DK Twin Shuttle Add-On
Geo Knight DKA-TWIN DK Twin Shuttle Add-On Adding a twin shuttle upgrade allows the operator to unload and load materials while a cycle is pressing. It also negates heat platen idle time while the operator prepares the table. Production is maximized with no additional labor cost. This shuttle is solid aluminum, holding any heavy or rigid imprintable products as well as fabrics without concern. For almost double the productivity per single operator, the Digital Knight Twin Shuttle Upgrade is an unbeatable value.
$624.00
Geo Knight DKA-STAND Universal Stand with Casters
The Digital Knight Universal Stand is manufactured from heavy duty solid steel and features locking and pivoting wheels. This unit ships disassembled and easily assembles in minutes. The stand keeps your heat press stable, mobile and easy to move. Make space for tight locations with this universal stand which is fully compatible with models DK20S, DK20SP, DC16, DC16AP, DK20, DK16. Geo Knight DKA-STAND Universal Stand with Casters
$284.00
Geo Knight DK16-AUTO Auto Release Pop-Up Upgrade
Geo Knight DK16-AUTO Auto Release Pop-Up Upgrade The Digital Knight Auto-Release "Pop-Up" upgrade can be added to any DK16 clamshell press with the most recent Dual-Shock framework. This upgrade is factory installed by a technician at no additional charge when purchased together with the DK16 (order the DK16A). However, for a pre-existing DK16, the pop-up is available as an add-on upgrade that you can install yourself.
$188.00
Geo Knight DK20-AUTO Auto Release Pop-Up Upgrade
The Digital Knight Auto-Release "Pop-Up" upgrade can be added to any DK20 clamshell press with the most recent Dual-Shock framework. This upgrade is factory installed by a technician at no additional charge when purchased together with the DK20 (order the DK20A). However, for a pre-existing DK20, the pop-up is available as an add-on upgrade that you can install yourself. Geo Knight DK20-AUTO Auto Release Pop-Up Upgrade
$188.00
Geo Knight DCA-1416BHT Digital Combo 14 x 16 Bottom Heat
Geo Knight DCA-1416BHT Digital Combo 14 x 16 Bottom Heat A bottom heated 14" x 16" platen pedestal is available for the DC16 and DC16AP. The separately controlled heat pedestal slides into the same position as the standard table. This drop-on table is ideal for thick embriodered appliques, certain lettering transfers, and other heat transfer and fusing applications requiring top and/or bottom heat.
$936.00
Geo Knight DKA-68BHT DK8/DC16 6 x 8 Bottom Heat
A bottom heated 6" x 8" platen pedestal available for the DK8 and DK8T. The separately controlled heat pedestal slides right into the position the standard table is located. This drop-on table is ideal for thick embriodered appliques, certain lettering transfers, and other heat transfer and fusing applications requiring top and/or bottom heat. Geo Knight DKA-68BHT DK8/DC16 6 x 8 Bottom Heat
$476.00
Geo Knight DK Drop-On Tables
Geo Knight Maxi-Press Large Format Heat Press A variety of different sized instant quick-change drop-on bottom tables are available for the DK20S, DK20 and DK16 presses. These tables will help accommodate any item imaginable.
From $82 to $154 (see below)
Geo Knight DK8/DC Drop-On Tables

A variety of different sized instant quick-change drop-on bottom tables are available for the DC16 and DC16AP presses. These tables will help accommodate any item imaginable.

Geo Knight DK/DC Drop-On Tables
From $58 to $159 (see below)
Geo Knight DK/DC Standard Curved Cap Forms
Geo Knight DK/DC Standard Curved Cap Forms A variety of different sized instant quick-change drop-on bottom tables are available for the DC16, DC16AP, DK8, DK7 presses. These tables will help accommodate cap pressing and imprinting.
Three Sizes at $58 each (see below)
Geo Knight Heat Press Teflon Sheet Accessory

Non-stick teflon sheets are the perfect cover sheet material for vinyl lettering and other applications.

Geo Knight Heat Press Teflon Sheet Accessory
From $14 to $39 (see below)
Geo Knight Heat Press Teflon Wrap Accessory
Geo Knight Heat Press Teflon Wrap Accessory Not just an accessory, a necessity. Allows garments and fabrics to slide on and off effortlessly & fast! Keeps rubber pad from pulling up, and easily wipes clean. For 16x20 and 14x16 presses.
From $29 to $34 (see below)
Geo Knight Heat Press White Nomex Accessory
Soft and heat resistant nomex pads are used for tile printing and radius wrapping. Also useful for extra soft material support. Geo Knight Heat Press White Nomex Accessory
From $29 to $216 (see below)
Geo Knight 1/8" Green Heat Conductive
Geo Knight Heat Press Green Heat Conductive Rubber Accessory Conductive 1/8" thick green high temp pads for miscellaneous rigid surfaces.
From $111 to $447 (see below)
Digital Knight RPK-PYRMTR Pyrometer and Surface Probe Kit
The best device for reading and calibrating temperature on your heat platen. This industrial surface contact probe is the most accurate available. (Infrared laser guns are not accurate on aluminum surfaces) Digital Knight RPK-PYRMTR Pyrometer and Surface Probe Kit
$82.00

Geo Knight Dye Sublimation Heat Press Equipment Accessories

Heat printing accessories are crucial to achieving the correct results the first time, whether you are setting up a new shop or an existing one. Our universal stand and drop-on tables enhance productivity and workflow. Teflon is used to make excellent, long lasting protective sheets and wraps that keep your work and heat platen clean and allow for easy sliding on and off of garments and fabrics. Nomex and heat conductive rubber are specialty pads used to provide a soft supporting or covering padding for tile, metals, and other items.

MACHINE OPTIONS
Model
Price
 
DK Twin Shuttle Add-On DKA-TWIN $624
Universal Stand with Casters DKA-STAND $284
DK16 Auto Release Pop-Up Upgrade DK16-AUTO $188
DK20 Auto Release Pop-Up Upgrade DK20-AUTO $188
Digital Combo 14x16 Bottom Heat DCA-1416BHT $936
DK8/DC16 6x8 Bottom Heat DKA-68BHT $476
     
INTERCHANGEABLE TABLES
Model
Price
 
DK 10 x 12 Drop-On Table DKA-1012TBL $82
DK 12 x 14 Drop-On Table DKA-1214TBL $92
DK 14 x 16 Drop-On Table DKA-1416TBL $120
DK 16 x 20 Drop-On Table DKA-1620TBL $154
Digital Combo 10 x 12 Drop-On Table DCA-1012TBL $116
Digital Combo 12 x 14 Drop-On Table DCA-1214TBL $130
Digital Combo 14 x 16 Drop-On Table DCA-1416TBL $159
DK8/DC 6 x 8 Drop-On Table DKA-68TBL $58
DK8/DC 3 x 5 Drop-On Table DKA-35TBL $58
DK8/DC 3 x 3 Drop-On Table DKA-33TBL $58
DK7-DC 4 x 7 Standard Curved Cap Form DKA-47BF $58
DK7/DC 3.5 x 6.5 Medium Curved Cap Form DKA-EURO $58
DK7/DC 3 x 5 Small Curved Cap Form DKA-YOUTH $58
     
TEFLON
Model
Price
 
14 x 16 Teflon Sheet TRM-SM1416 $14
16 x 20 Teflon Sheet TRM-SM1620 $18
20 x 25 Teflon Sheet TRM-SM2025 $24
36 x 36 Teflon Continuous Roll TRM-SM3636 $39
14 x 16 Teflon Bottom Table Wrap CTW-1416 $29
16 x 20 Teflon Bottom Table Wrap CTW-1620 $34
     
NOMEX
Model
Price
 
1/2 x 12 x 14 White Nomex RMN-1/2NOM1214 $29
1/2 x 14 x 16 White Nomex RMN-1/2NOM1416 $39
1/2 x 16 x 20 White Nomex RMN-1/2NOM1620 $53
1/2 x 54 White Nomex Continuous Roll per Yard RMN-1/2NOM54YD $216
     
SILICONE RUBBER
Model
Price
 
3/8 x 6 x 8 Silicone Sponge SRM-3868 $18
3/8 x 12 x 14 Silicone Sponge SRM-381214 $53
3/8 x 14 x 16 Silicone Sponge SRM-381416 $58
3/8 x 16 x 20 Silicone Sponge SRM-381620 $87
3/8 x 20 x 25 Silicone Sponge SRM-382025 $149
3/8 x 36 x 36 Silicone Sponge SRM-383636 $231
     
HEAT CONDUCTIVE RUBBER
Model
Price
 
14 x 16 1/8 Green Heat Conductive Rubber HCR-181416 $111
16 x 20 1/8 Green Heat Conductive Rubber HCR-181620 $159
20 x 25 1/8 Green Heat Conductive Rubber HCR-1812025 $202
40 x 36 1/8 Green Heat Conductive Rubber per Yard HCR-184036 $447
     
PYROMETER & SURFACE PROBE KIT
Model
Price
 
Digital Knight Pyrometer and Surface Probe Kit RPK-PYRMTR $82